• 您现在的位置:首页 >> 测厚仪

    测厚仪

    QNT系列厚度计

     

      QNT系列厚度计,一种基于γ射线穿透材?#31995;?#36879;射量随被测材料厚度变化的非接触式厚度计。它可以用于金属板和非金属板、带材的在线检测。?#37096;?#20197;用于材?#31995;?#22312;线自动厚度控制。由于该测厚仪的高性能和低价格,20年来被全国25个省、市500个企业采用,并远销埃及、约旦、马来西亚、越南、巴基斯坦等国家,总销量已超过7000台。

     

    Series QNT Thickness Gage

     

      Series QNT thickness gage, a noncontact-type thickness gage based on the phenomenon that the gamma ray transmission volume varies depending on the thickness of materials to be measured. It can be applied to measuring the strip (sheet) of metals and nonmetals on line; it can also be used for automatic controlling the thickness of material on line. During the last 20 years, about 5000 sets of QNT-thickness gage with high specification and low price have been used by 500 users in 25 provinces and Egypt,Jordan,Malaysia,Vietnam,Pakistan,etc.

     

     

     


    QNT-2型厚度计

     

      QNT-2型厚度计用于在线检测,由于采用高灵敏度电离室?#36879;?#36136;量的集成电路,使得该厚度计有高可靠性、高稳定性并且操作和维修都很方便。它可以和选件气动C形架一起使用。

     

    QNT-2 Thickness Gage

     

      QNT-2 Thickness gage is used for measuring on line. Since the high-sensitivity ionization chamber and high quality integrated circuits are adopted, high reliability, stability and the convenience of operation and maintenance is to get. It may be used with optional pneumatic C-frame.
     

     

     

           技术指标:
         Specification

     

    测量范围

    Measuring range

    0~4毫米(对钢)

    0~4mm (for Fe)

    非线性

    Nonlinearity

    好于±0.3%或±3微米

    Less than ±0.3% or ±3µm

    灵敏度

    Sensitivity

    0.01毫米或0.001毫米(开关选择)

    0.01mm or 0.001mm (selected by switch)

    噪声(±微米)

    Noise (±µm)

    厚度小于0.5毫?#36164;保?#22122;声小于1微米;厚度小于1毫?#36164;保?#22122;声小于2微米

    <1µm for 0.5mm. <2µm for 1mm

    漂移

    Drift

    环境温度变化小于±5℃,好于±0.01毫米/24小时

    Less than ±0.01mm/24h (when temperature change should be within ±5)

    时间常数

    Time constant

    0.5秒(对厚度变化5%响应63%

    0.5sec (63% response for 5% change in thickness)

    采样时间

    Sampling time

    3/

    3time/sec

     

     

     

     

     

    QNT-4型厚度计

     

      QNT-4型厚度计用于在线厚度检测?#37096;?#20197;用于在线厚度自动控制。它显示厚度绝对值和厚度偏差值(数字和模拟),它有厚度绝对值输出(2进制码或8.4.2.1码),厚度偏差值输出(8.4.2.1码)和厚度偏差值模拟输出,这些信号可用于记录和与计算机通讯,由于采用高灵敏度电离室和工业控制计算机,可以自动校准0点并具有很高的精?#21462;?#23427;可以与选件电动C形架一起使用。

     

    QNT-4 Thickness Gage

     

      QNT-4 Thickness gage is used for measuring on line and automatic controlling the thickness on line. It displays the absolute thickness (digit) and the deviation of thickness (digit and analog). It has the output of absolute thickness (binary or 8.4.2.1 code), the output deviation thickness (8.4.2.1 code) and the analog output of deviation thickness for record and communication with industrial computer. Since the high-sensitivity ionization chamber and microprocessor are adopted, its “0 Point” can be adjusted automatically, high-accuracy measurement is possible to get. It may be with optional frame.
     

     

        技术指标:
        Specification

    测量范围

    Measuring range

    0~4毫米(对钢)

    0~4mm (for Fe)

    非线性

    Nonlinearity

    好于±0.1%或±1微米

    Less than ±0.1% or ±1µm

    灵敏度

    Sensitivity

    0.01毫米或0.001毫米(开关选择)

    0.01mm or 0.001mm (selected by switch)

    噪声(±微米)

    Noise (±µm)

    厚度小于0.5毫?#36164;保?#22122;声小于1微米;厚度小于1毫?#36164;保?#22122;声小于2微米(时间常数25毫秒);厚度小于1毫?#36164;保?#22122;声小于1微米(时间常数50毫秒)

    <1µm for 0.5mm; <2µm for 1mm (time constant 25ms); <1µm for 1mm (time constant 50ms)

    漂移

    Drift

    好于±0.01毫米/24小时(环境温度变化小于±5℃)

    Less than ±0.01mm/24h (when temperature change should be within ±5)

    时间常数

    Time constant

    25毫秒(对厚度变化5%响应63%);最小10毫秒

    25ms (63% response for 5% change in thickness); minimum 10ms

    采样时间

    Sampling time

    25/

    25time/sec

     

     

    QNT-4S型测厚仪武钢现场                          QNT-2型厚度计

     

    吉林快三走势 德甲士usb 重庆百变王牌投注小窍门 江西快三计划软件 结果i一肖中特免费 吉林时时彩软件下载 3d试机号分析汇总汇 斯诺克比分直播官方 福彩3d走势图1风采 内蒙古十一选五奖结果 排列五走势图30期 篮球竞猜让分胜负规则 合法彩票投注网站 吉林快三图表跨度 海南飞鱼开奖历史记录 棋牌游戏特效